JLG X14JH Operator Manual - Manual (Page 18)

15
Safety valves
Never alter and/or tamper with the safety valves and the controls in the main hydraulic
system. The Constructor declines any responsibility for damages to people, things or the
machine when the hydraulic valve standard gauging has been tampered with.
Fire prevention
Keep the engine compartment clean. Remove any pieces of
wood, paper and other flammable products; clean properly
any fuel leaks as they can be potential fire risks.
Petrol is extremely flammable and explosive under certain
conditions. Refuel in a well‑ventilated place and when the
engine is off.
Never smoke or cause sparks in the refuelling place or the fuel
storage place.
After refuelling, make sure that the cap is closed safely and
properly.
Take care not to touch the exhaust pipe when it is hot, as it remains hot during the working
of the machine and also after turning off the engine.
Preventing damages caused by washing the machine
When washing the machine do not direct high‑ pressure jets
onto the electric components. Do not use chemical or petrol
detergents that could cause serious damages to the plastic
components and the paint.
Preventing damages when the machine is at work.
When the machine has been stabilized and starts working, avoid entering in its working
range.
Manoeuvre systematically the controls slowly and regularly. Do not invert movements sharply.
BOOM LIFT MODELS X14JH
JLG
X14JHR0220311