JLG X14JH Operator Manual - Manual (Page 38)

35
2.5 SAFETY DEVICES
The instructions reported below regarding the safety devices are given to the user in order to
understand the machine behaviour and the possible working sequences; it will also be possi‑
ble to identify possible breakdowns and to be able to give more detailed information to the
customer service and thus obtaining quicker and cheaper interventions.
The machine is equipped with safety devices able to prevent dangerous situations for the
operator. Before starting any operation, the operator should check the perfect working of
these devices.
If a safety device does not work, either due to a breakdown or tampering, this could cause
serious damage to the machine and could jeopardise the operator’s life. The Constructor has
designed the machine and the safety devices to guarantee the maximum to its customers.
Anyhow the devices must be checked periodically according what described in this manual
and must never be tampered with.
Never intervene, on one’s initiative, on the safety devices. In case of tampering, the manufac‑
turer declines any responsibly regarding possible accidents resulting from such interven‑
tions.
It is absolutely forbidden to tamper with the lead seal or the calibration of the maximum val‑
ves. In case of tampering, the manufacturer declines any responsibility for any possible acci‑
dents resulting from such interventions.
The Constructor declines any responsibility for any damages caused by the machine to
things and/or people if the above mentioned has not been observed.
BOOM LIFT MODELS X14JH
JLG
X14JHR0220311
IMPORTANTE
PERICOLO
PERICOLO
PERICOLO
IMPORTANTE
DANGER
DANGER
DANGER
IMPORTANT
IMPORTANT