Brother HE 120 - Manual (Page 106)

100
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
CAUTION
e
Select a stitch.
• For details, refer to "Selecting stitching" (page
47).
f
Place one hand on each side of the presser
foot, and then evenly guide the fabric while
sewing.
Note
z When sewing with the walking foot, sew at a
speed between slow and medium.
z When quilting, use a 90/14 home sewing
machine needle.
■ Using the quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
a
Insert the stem of the quilter into the hole at
the rear of the walking foot or presser foot
holder.
† Walking foot
† Presser foot holder
b
Adjust the stem of the quilter so that the quilt
guide aligns with the seam that has already
been sewn.
● Be sure to securely tighten the screws
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
● Before starting to sew, slowly turn the
balance wheel toward you and check that
the needle does not touch the presser
foot. If the needle hits the presser foot,
the needle may bend or break.
SE-BrotherE_sgml.book Page 100 Monday, June 30, 2003 3:44 PM