Embroidery step by step – Brother HE 120 User Manual

Page 136

Advertising
background image

130

EMBROIDERY

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Embroidery step by step

The basic steps for embroidery are as follows.

1

Presser foot attachment

Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the

embroidery foot" (on the next page)

2

Checking the needle

Use a needle matched to the fabric.

For details on replacing the needle, refer to "Replacing the needle" (page
37).

3

Embroidery unit

attachment

Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the

embroidery unit" (page 134).

4

Bobbin thread setup

For the bobbin thread, wind embroidery bobbin thread and set it in

place.
For details on setting up the bobbin thread, refer to "Winding/Installing

the Bobbin" (page 18).

5

Fabric preparation

Attach a stabilizer material to the fabric, and hoop it in an embroidery

frame.
For details on preparing the fabric, refer to "Preparing the fabric" (page

138).

6

Embroidery frame
attachment

Attach the embroidery frame to the embroidery unit.

For details on attaching the embroidery frame, refer to "Attaching the
embroidery frame" (page 142).

7

Pattern selection

Turn the power on, and select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting

embroidery patterns" (page 144).

8

Checking the layout

Check and adjust the size and position of the embroidery.

For details on ajusting the layout, refer to "Adjusting the layout" (page
154).

9

Embroidery thread setup

Set up embroidery thread according to the pattern.
For details on the thread setup steps, refer to "Upper Threading" (page

23).

SE-BrotherE_sgml.book Page 130 Monday, June 30, 2003 3:44 PM

Advertising
This manual is related to the following products: