JLG 400CRT Operator Manual User Manual
Model, Operation & safety manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- FOREWORD
- Section 1. SAFETY PRECAUTIONS
- 1.1 General
- 1.2 Pre-operation
- 1.3 Operation
- 1.4 Towing, Lifting, and Hauling
- 1.5 Additional Hazards / Safety
- Section 2. Preparation and Inspection
- 2.1 General
- 2.2 Preparation for Use
- 2.3 Delivery and Periodic Inspection
- Handrail Assemblies
- Platform Assembly
- Sizzor Arms
- Electrical Cable
- Pivot Pins
- Lift Cylinder
- Frame
- Tire and Wheel Assemblies
- Sliding Wear Pad Blocks
- Hydraulic Oil Supply
- Steer Cylinder
- Steer Linkage
- Front Spindle Assemblies
- Control Boxes (Console and Ground)
- Battery
- Engine
- Hydraulic Pump and Valves
- Platform Placards
- 2.4 Daily Walk-Around Inspection
- 2.5 Daily Functional Check
- 2.6 Torque Requirements
- 2.7 Dual Fuel System (If Equipped)
- Section 3. user responsibilities and machine control
- Section 4. machine operation
- Section 5. Emergency Procedures
- Section 6. INSPECTION AND REPAIR LOG
- Corporate Office
- JLG Industries, Inc.
- 1 JLG Drive
- McConnellsburg PA. 17233-9533
- USA
- Phone: (717) 485-5161
- Fax: (717) 485-6417