I.R.I.S. IRIScan Express 2 for Windows Quick Start - Manual (Page 2)

IRIScan button manager
To go to the settings panel of the buttons manager, double click on the scanner’s icon in the taskbar.
Left button
Allows you to send the scanned document (jpeg format) directly into a directory.
to save the scanned document (jpeg format) directly into a blank email.
Right button
Allows you to send your document / business card directly into Readiris or Cardiris in two different ways.
Automatic: the document is automatically scanned and sent directly into Readiris / Cardiris.
The settings used are the default ones: - Resolution: 300 dpi for Readiris / 400 dpi for Cardiris.
- Color mode.
Manual: the scanner’s interface will appear in order to change the scan settings.
Readiris™ Pro 11
Install the Readiris software
After the installation of the scanner, click on “Readiris Pro 11”.
Follow the on-screen instructions.
Quick User Guide Readiris
1. Select and configure your IRIScan.
• Launch Readiris Pro.
• Fill in the serial number (refer to the sticker on the CD box), click on “OK”.
• Click on the Readiris Pro splash screen.
• Click on “Cancel” in the wizard screen.
• Click on the “Scanner” icon.
• Click on the “Scanner model” button and select IRIS IRIScan2 (TWAIN), click on “OK”.
• Choose the Format and the resolution (format: A4/letter and resolution: 300 dpi are recommended).
• Select greyscale or color if you have a bad quality document.
• Click on the “Scan” icon. The dialog box “Scanner calibration” appears.
• Insert the calibration sheet provided with the scanner. Click on “OK” to proceed the calibration.
• Insert the document you want to scan into the scanner.
• Click on the “Scan” icon.
3 - Quick Start Guide