I.R.I.S. IRISPen Executive 6 for Windows - Manual (Page 40)

IRISPen Executive 6 - User's guide
34
The set of characters used by the software to read such data is the
same for all languages. You can freely customize this character set
(see: Frequent command: Character Subset).
Also refer to: Learn how to... Read numeric data.
Black-and-white image to clipboard:
To scan small black-and-white graphics such as signatures,
mathematical formulae, etc. The image will be sent to the clipboard
before it can be pasted into the active application.
Grayscale image to clipboard:
To scan grayscale or color graphics and send them to your clipboard
before they can be pasted in a chosen application.
Barcodes:
To read barcodes. Select this option to read barcodes exclusively. If
you want to read barcodes alongside other data, select the reading
option Barcodes. The character string resulting from the reading
will directly appear in the target application.
You can also further fine-tune the barcode reading according to
your needs (see: Frequent commands, Barcodes).
Also refer to: Learn how to... Read barcodes.
CMC7:
To read CMC7 symbols.
Handprinting:
To read handprinted numbers and/or handprinted capital letters in a
certain language.
It is recommended to further adjust the handprinting settings (see:
Frequent command: Handprinting).
Also refer to: Learn how to... Read handprinting.