I.R.I.S. IRISPen Executive 6 for Windows - Manual (Page 52)

IRISPen Executive 6 - User's guide
46
Add ending code:
You can have the IRISPen execute operations automatically in
the target application after the output result is being inserted. If
you insert data into a database, you can for example define a
tabulation as ending code to automatically position your cursor
in the next field. A series of possible codes are proposed by
default, but you can also introduce your own ending code.
To insert an ending code, select a code from the drop-down list
or select Custom to introduce your own code, then click OK to
confirm. You can add any combination of keyboard commands
and/or characters.
The default ending code is: <Space>.
• Click OK to confirm and close the window.
C
HARACTER SUBSET
The subset of characters used by the IRISPen to read data is set
according to the Scan type and the Language chosen for the
reading. As you can imagine, the subset of characters used for
reading numeric data differs from the one used for reading text: the
first one mainly contains figures while the second one also contains
letters. Similarly, the subset used for reading English differs from
the one used for reading French (think of the "й", "и", "ы", etc. that
do not exist in English), etc.