I.R.I.S. IRIScan Anywhere 3 for Mac - Manual (Page 2)

When you turn on the scanner the light will flash as it powers up. Wait for it to turn a steady green before attempting to
scan. If you press the button again it will turn orange indicating that it is now scanning at 600 DPI rather than 300 DPI.
When it is inactive it powers down and shows a pale yellow light.
When you scan with the IRIScan Anywhere the JPG images are stored in memory on the scanner itself unless you have
an SD card or USB flash plugged into the scanner in which case they will be stored there. You will not be able to scan
from within the Readiris/Cardiris software using this scanner because there is no twain driver. That is deliberate and by
design. It is what makes the scanner completely portable without requiring a computer to operate.
Insert the page or card face up on the left side of the scanner and it will be pulled through and stored in memory. The
scanner is designed to be used disconnected from the computer until it is time to upload the images stored in memory.
When you connect the scanner and turn it on this icon will appear on the desktop. This is the scanner memory and the
images can be opened from within the Readiris|Cardiris software. You can also drag and drop then onto their dock
icons.
There will be a folder labeled DCIM that has a folder called IRIS_IS in Finder where the scanned images are stored.