I.R.I.S. IRIScan Anywhere 3 for Mac - Manual (Page 5)

Cardiris
With the scanner connected and turned on start the Cardiris software and it will offer to open the images. You can also
use the Load and Create icon on the left toolbar.
To select all the images - Single click on the first image then hold down the shift key and select the last.
To select some of the images - Single click on the first image then hold down the Apple/Command key and select the
desired images.
The card images will load and display tumbnails to the right of the left tool bar. The information will be extracted and
any corrections can be make in the fields below the card image.
To include the card image draw a box around the card with your mouse and drag it to the portrait silhouette to the
lower right of the card image. You can then click on Save Selection for individual cards or Save All. This will save it
directly to the Address Book without the need to export.