BURY Time Suite - Manual (Page 8)

8
Installation and types of use
An input window appears for the user details .
Here, first of all enter the user name. This should
be chosen so that is as clear as possible and, if
available, corresponds with your in-house designa-
tion guidelines.
Subsequently enter all of the additional details in as
far as you want to maintain the secondary data of
the employee here. A photograph of the employee
can also be added by clicking on the photo
section.
The compulsory fields are equipped with a red fra-
me. These have to be filled in to be able to input
the data set. Finally, specify a password for the
user. Next, click on ‘save’ in order to input the data
set. The new user now appears under the entry for
the administrator who you entered when you first
started the administration software.
Repeat step 3 until all of the users have been registered.
Step 4:
Also install the software on the PC systems of the employees who are to use the BURY Time Suite
software later.
Start the BURY Time Suite and enter a password for the administrator. This password is completely
independent of the one which you used on the server during the installation. For safety reasons, it
should differ from it, however. You can use this new password with all subsequent installations. As a
rule, it won’t be needed any more in the future, as the users don’t use the local database but the da-
tabase of the server.
After the appearance of the user interface, click on file and then on settings in the upper left corner.
In the window which then opens, please enter the IP address of the server and the noted path details
of the database. By clicking on ‘test connection’ you can check your inputs and the access. A corre-
sponding message appears. If the details are correct, please click on ‘save’. The BURY Time Suite is
subsequently closed.