IOGear GCE250 - Manual (Page 7)

7
System Requirements
Consoles (one per unit)
• A VGA, SVGA, or Multi-sync monitor capable of the highest resolution that you will be using on any computer
in the installation
• A PS/2 style keyboard
• A PS/2 style mouse
Note:
1. If you connect a DDC type monitor to the Local Unit, the monitor that connects to the Remote Unit must be
able to support the highest video resolution that the DDC monitor can provide.
2. You must use the same brand and model of mouse on both the local and remote units.
Computers or KVM
The following equipment must be installed on each computer that is to be connected to the system:
• A VGA, SVGA, or Multi-sync card ( Computers only)
• A PS/2 mouse port
• A PS/2 Keyboard port