IOGear GCS1214TAA User Manual
Page 7
6
7
Port LEDs-
1.
The Port LEDs are built into the Port Selection Pushbuttons. Online – Lights
green to
indicate that the computer attached to its corresponding port is up and running. Note: The green light
for a given port is lit for as long as there is a powered on USB connection between the KVM switch and
computer. Selected – Lights
orange to indicate that the computer attached to its corresponding port
has the KVM.Note: The Selected LEDs will flash constantly when a chassis intrusion is detected. See
Chassis Intrusion Detection, page 12 for further details.
Port Selection Pushbuttons
2.
- Pressing a Port Selection Pushbuttonbrings the focus to the computer
attached to its corresponding port.
Reset Button-
3.
Press this to reset the GCS1212TAA / GCS1214TAA to the default settings.
Console Audio Ports-
4.
The cables from your main speakers and main microphone plug in here. The
speakers and microphone plugged in here have priority over those in the rear panel.
Power LED-
5.
Lights blue to indicate that the GCS1212TAA / GCS1214TAA is powered on.
USB Console Ports-
6.
Your USB keyboard and mouse plug into these ports.
Console Audio Ports-
7.
The cables from your main speakers and main microphone plug in here. The
speakers and microphone plugged in here have priority over those in the rear panel.
8.
Console Monitor Port- The cable from your console monitor plugs in here.
9.
KVM Port Section- The custom KVM cables that attach to your computers plug in here.
Power Switch-
10.
To turn the power on and off.
Power Socket-
11.
Where the power cord is plugged in.
Grounding Screw-
12.
See Grounding, page 8 for further details.