IOGear GCS642U User Manual
Page 15
15
Combination
Configuration
[Num Lock] [-]
[F10]
To auto detect the keyboard operating platform:
[F4]
To list the current switch settings via the paste function of a text editor.
[F5]
To perform a USB keyboard and mouse reset:
[F6]
[nn]
[Enter]
To set the keyboard language layout: Note: nn is a two-digit number that
represents one of the following keyboard language codes: 33 – US English
08 – French 15 – Japanese
[r]
[Enter]
To reset the hotkeys to their default setting.
[A]
To start Auto Scanning with default 5 sec. scan interval
[n]
[Enter]
To change the scan interval after Auto Scan has started. Note: n is a
number from 1–4 as follows: 1 = 3 sec; 2 = 5 sec; 3 = 10 sec; 4 = 20 sec.
[Scroll Lock] [Scroll Lock]
To switch ports.
[Esc] or [Space Bar]
To exit hotkey or auto scan mode.