IOGear GCS84A User Manual
Page 16
Advertising
Selecting the Active Port
(GCS82A only)
You can toggle between the two PCs by pressing and releasing the left or right control key twice [ctrl]+[ctrl]
(GCS84A only)
Each CPU port is assigned a numeric ID (1-4). You can directly access any computer connected to the KVM with a hotkey
combination that specifies the ID of the CPU port.
• Press each of the following keys, in order, holding them down until all three are depressed. [Alt+Ctrl+Shift]
• Key in the appropriate port number (1,2,3,4)
• Press [ENTER] to complete your selection
Note: The combination must be on the same side of the keyboard (i.e. Left [ctrl]+left[Alt]+left[shift])
12
Operation
Advertising
This manual is related to the following products: