IOGear GHE135C User Manual
Page 26
24
Installation of ION™ Drive Software (Mac)
• Open Combo ION™ Drive Folder
• Open Mac OS 10 folder that corresponds to your OSX installation. Either 10.1.X for 10.1.5 or before or
choose 10.2.X for 10.2 or later.
• Double click on 3.5_Combo Installer.pkg
• Enter Administrator Password and click OK.
• Click Continue when prompted
• Click Continue when prompted
• Select Destination. Make sure to choose the partition that has your OS X installation on it. Then click OK.
• Now click Next at the next screen.
• The computer will prompt you that the installation will require a reboot. Click Continue Installation.
For Mac OS X Users Only
• After installation completes click on Restart and computer reboots. When boot is complete the drive is ready
to be attached and used.