IOGear GHPU21 - Manual (Page 23)

5. Advanced
The Advanced tab is where you can set the Network
Password on all of the HomePlug devices at once. This
way, you don’t have to connect to each device and set the
password one by one.
Network Password – Displays the Network Password.
Device Password – This is where you enter the password
located on the bottom of you HomePlug device. Once you
enter the password and click “Add.” This will add that
device to the “Remote Passwords” field.
Remote Passwords – This field displays the password for
devices you added. Once you’ve finished adding all the
HomePlug devices on your network, press the “Set All”
button. This will change the Network Password on all the
devices listed.
(Note: “Remote” here refers to remote password setting in the same power
line network. It is not referring to IP access from outside the power line
network.)
Configuration
20