IOGear GPU202 - Manual

USB 2.0 CardBus Card
GPU202 USER'S MANUAL
Read this guide thoroughly and follow the installation and operation procedures carefully to
prevent any damage to the unit and/or any of devices it connects to:
This package contains:
• 1 USB 2.0 CardBus Card (Model# GPU202)
• 1 User Manual
• 1 Software Disc
• Warranty Card
Welcome
Thank you for purchasing IOGEAR's USB 2.0 CardBus Card. IOGEAR brings the
cutting edge technology of USB 2.0 to your Macintosh® and IBM® compatible
computer. You will enjoy the convenience and newfound speed that has made
this technology an industry standard.
Note:
Your order has been carefully packaged and inspected, and we hope you are pleased with the
IOGEAR product you purchased. Please inspect the contents of the package to ensure that you
have received all items and that nothing has been damaged. If you discover a problem, please
contact your dealer immediately for assistance.
Contact Information:
949-428-1111
23 Hubble Drive, Irvine, CA 92618 USA
www.iogear.com
[email protected]
2.Installation (PC)
1) Please make sure your external USB 2.0 devices are not connected when
installing the card.
2) With the Laptop on, locate an available CardBus Slot and insert the USB 2.0
CardBus Card.
3) Windows will automatically detect the card and a dialogue box will appear,
showing that the computer has located the new USB 2.0 CardBus Card, Windows
will then prompt you for the location of the software driver. Then click
"Next"
Follow and continue through the "Wizards" installation instructions to its entirety.
4) After the installation, the dialogue box "Window's has finished installing the new
hardware" will appear. Click "Finish" to complete setup and reboot your
notebook.
5) Now the USB 2.0 CardBus Card is ready to connect to external USB 2.0 devices.
3. Installation (Mac)
1) Please make sure your external USB 2.0 devices are not connected when
installing the card.
2) With the Powerbook™ on, locate with the available CardBus Slot and insert the
USB 2.0 CardBus Card.
3) Now the USB 2.0 CardBus Card is ready to connect to external USB 2.0
devices.
© 2001 IOGEAR®. All Rights Reserved.
All brand names and trademarks are the registered property of their respective owners.
PKG-M0003
5. Specifications
• Radio & TV Interference
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE
PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE
PRODUCT, DISK, OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or
statutory with respect to the contents or use of this documentation, and especially
disclaims its quality, performance, merchantability, or fitness for any particular
purpose.
The direct vendor also reserves the right to revise or update the device or
documentation without obligation to notify any individual or entity of such revisions,
or update. For further inquiries, please contact your direct vendor.
1. Hardware Requirements and Features
• PC
1) Windows 98, 98SE, 2000, ME, XP
2) Available 32bit CardBus Slot
• Mac
1) OS X or Later
2) Available 32bit CardBus Slot
*Based upon the availability of the Mac Driver
• Product Features
1) USB 2.0 compliant
2) Fully backward compatible with USB 1.1
3) Support High Speed Data Transfer Rates of up to 480 Mbps (Megabits Per
Second)
4) 40 Times Faster Than The Original USB
5) Supports Mac OS X or Later; Windows® 98, 98SE, 2000, ME, XP
6) Hot Swappable -Plug-N-Play
7) 2 Type A USB Ports
8) PC Power Management v2.2 Compliant
• 3-Year Limited Warranty
• USB 2.0 Certified
4. Optional Power Adapter
For your high power needs, please use an external power adapter (DC 5V, 2.3A) to
explore the full potential of this card. You can purchase the IOGEAR slim power
adapter (Part No. 0AD1-0705-231) by calling (949) 428-1111 or visiting
www.IOGEAR.com