IOGear GUD300 - Manual (Page 4)

3
Hardware Installation
1. Plug-in the AC adapter into the Universal Docking Station.
2. Connect the Universal Docking Station to an available USB 3.0 port
on the Ultrabook, laptop, or tablet.
3. Connect any USB 3.0 compatible devices here. USB 3.0 ports are
also backwards compatible with USB 2.0 and 1.1 devices.
4. Connect any USB 2.0 or 1.1 compatible devices here.
5. Your Universal Docking station can support an additional HDMI
monitor. Connect the monitor to the docking station and your
computer will automatically detect the additional display. A DVI
monitor may be connected using the included HDMI to DVI adapter.
6. Your Universal Docking station can also support an additional DVI
monitor. Connect the monitor to the docking station and your
computer will automatically detect the additional display. A VGA
monitor may be connected using the included DVI to VGA adapter.
7. Connect an Ethernet cable to the Gigabit WAN port for high speed
internet.
8. Connect an independent microphone for higher quality recording.
9. Connect external speakers or use with the microphone input for a
headset with built-in microphone.
2TB
HDD
2TB
HDD
Backspace
1 A
5 7
8
9
6 2
1
USB 3.0 Device USB 2.0 Device
4 3