IOGear GUIP204 v2 - Manual (Page 29)

28 29
There are two ways to automatically connect
USB devices: automatic connection by device or
automatic connection by USB port.
Automatic Connection by Device
Select the device, right-click and check
“Connect this device when application starts”.
Once enabled, the particular USB device will be
connected automatically when:
The USB server software starts up and the 1.
device is powered-on and Free
The USB server software is already running
2.
and you turn on the device
The USB server software is already running
3.
and the device status changes to Free
However, if the user manually disconnects the
device later, it will NOT be automatically connected
again until the software has been restarted.
Advanced Features - Device Auto Connect