IOGear GUWAVKIT2 - Manual (Page 8)

7
General Troubleshooting
Minor issues can generally be resolved by checking the following:
• Make sure that the TV was set on the correct “Input” source, such “HDMI 1”
• Detach and reattach the transmitter from your computer’s USB port, wait for the connection
to re-establish (may take a few seconds)
• Power cycle the Wireless HD receiver
• Change the display mode via the Displaylink GUI, or OS’ Display Properties between
“Extended” and “Mirror” mode
Audio Setting
• After the installation, your computer should direct the Audio to the AV adapter. If not, please
verify that the “USB PnP Sound Device” is selected as your Default Sound Playback Device:
• Right click on the Speaker icon at the right corner of your system tray, or go to Start ->
Control Panel -> Sounds and Audio Devices, then select Audio tab.
If there is still no sound coming from the TV, restart the media player, reload the Website, or
reopen the media file.
Troubleshooting
Extended Mode Mirror Mode
(extend your desktop area) (duplicates what is on the primary display)