Connect to an attached usb device – IOGear GUWIP204 User Manual
Page 24
Advertising
24
25
Connect to an attached USB device
Open the USB Share Station Utility. You should see GUWIP204 as well as the attached USB
devices. Make sure the drivers for these are already installed on your computer for before
connecting to them through the GUWIP204.
Click on the device you wish to connect
1.
to, then click on the “Connect” icon.
Clicking on the “Connect” icon simulates
an actual USB device plug-in.
Now you can use the device as if it were
2.
connected directly to your PC’s USB Port.
Once connected you will see “Manually
Connected By Your Computer’s Name”.
NOTE: Only 1 PC is allowed to connect to the USB Device at a time.
Advertising