IOGear GWA502 Manual - Manual (Page 42)

39
Configuration Utility
RADIUS Server IP
Please enter the IP address of RADIUS server
RADIUS Server Port
This field specifies the port on which RADIUS server
is listening.
RADIUS Server Key
This field carries the shared secret for RADIUS
authentication. Some information need to be
encrypted in a RADIUS packet, this key is used to
encrypt and decrypt this information (such as
password).
Reconfirm RADIUS Server Key
Make sure RADIUS Server Key is correct.
WPA Group Rekey Interval
It is the same as WPA-PSK configuration
Encryption Type
It is the same WPA-PSK configuration
Note:
To complete the WPA operation, you also need to enable the
WPA client at the wireless client site (the computer running
wireless client’s devices, such as the GWP511 Cardbus card
GWP512 Cardbus Card or GWU513 USB adaptor).
Microsoft provides a free WPA upgrade for Windows XP
Service Pack 1 (SP1) and later or Windows Server 2003. For
any OS other than Win XP, there is client software available
from third-party suppliers such as Funk Software’s Odyssey
(www.funk.com). IOGEAR’s GWP512 Wireless-G Network PC
Card has it built-in.
The WPA client for Windows XP can be found in the Microsoft
Knowledge Base Article 815485 (http://support.microsoft.com/
default.aspx?scid=kb;en-us;815485) or downloaded directly
from Microsoft http://www.microsoft.com/downloads/
details.aspx?FamilyID=009d8425-ce2b-47a4-abec-
274845dc9e91&displaylang=en