Assembly, 1 trailer assembly (342cc models), 2assembly – Echo 77412 Owners Manual v.4 User Manual

Page 13: Warning

Advertising
background image

4.5 INCH CHIPPER

11

Section

2

aSSemblY

Attach both axles to the hitch pole using two 5/16"

1.

u-bolts, washers and locknuts.

Slide a wheel onto the axle and secure with a 5/8"

2.

washer and cotter pin. Repeat for the remaining

wheel.
position the trailer onto the axle using a hoist or

3.

jack:

Standard configuration (figures 1 & 2):

a.

The

axle and wheels should be positioned at the end

farthest away from the engine. Secure the trailer

to the hitch pole using two 3/8" x 1" carriage bolts,

3/8" washers and 3/8" nuts. The axle mounting

brackets located on each side of the trailer are

already mounted in the correct spot. Attach the

axles to the axle brackets using two 5/16" u-bolts,

washers and locknuts.
optional configuration (figure 3):

b.

move the

axle mounting brackets on the side of the trailer to

the holes

closest to the engine. Attach the trailer

to the hitch pole using two 3/8" x 1" carriage bolts,

3/8" washers and 3/8" nuts. Attach the axles to the

axle brackets using two 5/16" u-bolts, washers

and locknuts.

Attach the hitch pole plate to the front of the hitch

4.

pole using two 3/8" x 1" bolts, 3/8" washers and 3/8"

nuts.

Figure 1, standard trailer/hitch assembly

(Models 77412, 77412s)

Figure 2, standard trailer configuration

(Models 77412, 77412s)

Figure 3, optional trailer configuration

(Models 77412, 77412s)

Warning

Before inspecting or servicing any part of this machine,

shut off power source, disconnect spark plug wire from

spark plug and make sure all moving parts have come

to a complete stop.

noTe

The wheel base is adjustable from 36" to 46".

Warning

If any bolts or nuts are dropped in the machine, be sure

to remove them before starting the machine. Remove

items from the shredder area by removing the discharge

screen.

2.1 Trailer aSSemblY (342cc modelS)

noTe

The optional trailer configuration with the discharge tube

is optimal for discharging material into a pickup bed. The

standard configuration is used when discharging material

directly to the ground.

Advertising
This manual is related to the following products: