Brother TN 430 User Manual
Page 10
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE
25. Extract the transfer roller from the cartridge using a pair of
long nose pliers. Notice that the saddles and the helical gear
will also come out. Clean the roller with compressed air or vacu-
um cleaner. DO NOT USE any solvent or chemicals on the trans-
ference roller.
24. NOTE: There is also a plastic stabilizer bearing for the axle
located on the same side of the clutch gear which must be
secured.
NOTES
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER HL 1240/165 (TN 430/460) CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
w w w.
u n i n e t
i m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]