Brother TN 430 User Manual
Page 5
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER HL 1240/165 (TN 430/460) CARTRIDGE REMANUFACTURING INSTRUCTIONS
9. Discharge any toner from the toner hopper. Use dry com-
pressed air or a vacuum to THOROUGHLY clean out the toner
hopper. Clean the developer blade using a dry lint free cloth.
NOTE: DO NOT attempt to re-use any of the toner remaining in
the cartridge and DO NOT complete the charge by adding new or
unused toner from another old cartridge.
NOTES
7. Lift the developer roller from the hopper. NOTE: Clean the roller
using a clean lint free cloth. DO NOT USE any solvent or chemi-
cals on the developer roller.
8. Remove the fill plug from the hopper.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
w w w.
u n i n e t
i m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]