ADS-TEC OPC6115/6315 - Manual (Page 36)

OPC6115/6315 35
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
9.1.2 COM Input Configuration
COM input configuration allows the application to verify the correct RFID function. By activation of COM2,the
data is send automatically to an active application that uses the COM2 port forwarded.
Note:
Unnecessary applications that use the COM2 port must be stopped before running
the COM input configuration. Because of different programming, data on various
editors like Notepad or Word are represented differently.
9.1.3 Ignition
The ignition application allows the control of the VMT6 device ignition function. If the status is set to Enabled,
the device is switched off after expiry of the preset period of time.