AiM MyTach - Manual (Page 19)

MyTach – User Manual
Release 1.04
5.1.5.2 – Select Target
To set Target:
•
Select “Target”
•
Press “START/stop”
•
Set threshold alert value using
“Arrow” buttons to increase/ decrease
digit value.
•
Select Unit pressing “START/stop”
•
Press “GPS on-off” to quit
5.1.5.3 – Select Work Range
To set Work Range :
www.aim-sportline.com/mytach 19
•
Select “Work Range”
•
Press “START/stop”
•
Press “Arrow” buttons to increase or
decrease digits.
•
Press “GPS on-off” to quit
For example:
Fixed target: 10,2 Km/h
Range:12%
Alarm beeps when < 8,9 Km/h
Alarm beeps when > 11,4 Km/h
Alarm beeps when the gap goes 12% over the selected target.
Note: range can be positive or negative and work range function is available only for
speed measure.