4 – mxl gsx-r k3 firmware – AiM GSX-R 1000 User Manual

Page 19

Advertising
background image

MXL P&P SUZUKI GSX-R K3

User Manual

Release 1.07

www.aim-sportline.com

3

4 – MXL GSX-R K3 firmware

MXL Strada/Pista for Suzuki GSX-R K3 is equipped with a special firmware version, that
provides the user with a second virtual dashboard.

On the road, the display is set on “street mode”
and shows these parameters:

RPM graph bar configurable scaling: black

digital RPM value / battery voltage / total and
partial odometer, date and time: fuchsia
(VIEW/QUIT button to switch the options);

Speed: red

Engaged gear: green

Always on top analog inputs depending on MXL
version: blue

Field, until 4 fields displayed two by two: light
blue

To switch the visualization, use “>>” button.

On the track, when passing by a switched on
transmitter, the display switches automatically on
“track mode”.
Lap time takes the place of odometer on the
display (Figure 31).

Figure 30: Display in modalità strada

Figure 31: Display in modalità pista

Visualisation mode (street/track) set via software is stored by the logger. Default setting is
“show odometer”. If user sets via software “Show lap time” this visualisation mode is
restored at each switch on, no matter if the bike is on the road or on track.

Note: for further information concerning the display management and its configuration
refer to MXL Strada/ Pista/Pro and/or Race Studio Configuration user manual.

19

Advertising
This manual is related to the following products: