7 projection setup – AirLive AirVideo-2000 User Manual
Page 26
AirVideo-2000 User’s Manual
23
<DHCP Server Setup>
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
♦
Default Gateway: The default value is 192.168.1.1
< Wireless Setup>
♦
SSID: This is SSID of AirVideo-2000. The string length is 32 bytes.
♦
Channel: to set fixed channel or Auto. The “Auto” means after power on AirVideo-2000, it will scan
all of wireless channel and select clear one channel automatically.
♦
WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII or HEX string.
♦
Key: If WEP is enabled, you have to set key value according to WEP mode you selected.
<Apply >: press button to select this mode
<Cancel>: press button to abort action.
<Back>: Back to Operating mode main menu
4-7 Projection Setup
*** Click [Projection Setup] button
♦
<Resolution>: 1024x768 and 800x600.
♦
<Color Depth>: provide AirVideo-2000 output with 16bit or 32 bit color depth. It depends on
your PC settings.
♦
<Screen Refresh Rate>: This is VGA output refresh rate, provides 60 Hz and 75Hz to suit for
different kinds of projectors.
♦
<Apply>：Confirmation and Save modifications
♦
<Cancel>: Cancel all the modifications