AirLive AirVideo-2000 - Manual (Page 9)

Chapter 2: Quick Start
1) Connect projector VGA cable to AirVideo-2000 box VGA connector and turn on projector power.
2) Turn on AirVideo-2000 box.
♦ When Projector shows the default menu on the screen as below, it indicates the AirVideo-2000 box
is ready now.
3) Make sure your PC WLAN is enabled already, and connect your PC with AirVideo-2000 box.
4) Open your browser and enter the IP address to get in AirVideo-2000 web home page.
♦ The default IP address of AirVideo-2000 is 192.168.1.1 or refers to the IP address shown on the
left corner of projector screen.
AirVideo-2000 User’s Manual
6