AirLive BU-2015 - Manual (Page 46)

6. Configuration
AirLive BU-2015 User’s Manual 41
Factory Reset (1) Clear all settings of IP camera and reset to factory default setting.
(2) Reset all parameters, except for the IP, time zone and daylight
saving parameters to the original factory settings
Backup Backup IP camera’s setting and save it on your computer.
Backup to SD
card device Backup IP camera’s setting and save it on SD card. A SD card must be
inserted into SD card slot when you click this button, or you’ll receive
an error message.
Restore Restore a previously-saved configuration file saved on your computer.
Click ‘Browse’ button to select a file on your computer first, then click
‘Restore’ button.
Restore from
SD card device Restore IP camera’s configuration which is previously-saved on SD
card.
Upgrade Upgrade IP camera’s firmware. Click ‘Browse’ button to select a
firmware image file on your computer first, then click ‘Upgrade’ button.