AirLive BU-3026-IVS - Manual (Page 63)

7. Appendix
AirLive BU-3026/BU-3026-IVS User’s Manual 59
z
S elect Sensitivity to set the detection sensitivity level. Higher sensitivity will make it
easier to detect and less objects missing, but more misjudgments.
z Select People / Vehicles / Anything as the detected objects.
z Select Calibration (People or Vehicle Object Sizes) . The minimum and maximum
boundary of objects can be specified to improve the detection accuracy. If any false
detection caused by smaller objects, you can try to increase the minimum size.
–Min. Size of Calibration: The width and length values must be 6 pixels at least. If any
false detection caused by smaller objects, you can try to increase the minimum size.
–Max. Size of Calibration: It has to be larger than the minimum size and half the
frame size is the most.
z In Event Conditions, you can specify the minimum time interval and quantity for each
alarm. And go add or edit the IVS event in the Set Event Action.
z Enable / Disable the Counting Result Overlay.
z Enable / Disable the Detect Line Overlay.
z Reset Counter: Select the minimum time interval to reset the counter result.
z
Select Rotate Mode or Transform Mode in Edit Mode:
‐ Rotate Mode: User can rotate the zone at will.
‐ Transform Mode: User can drag the point of the zone to any shape
z Directionality: User can select the detected moving direction from one to another or
both the directions.
z Statistics Record: You can configure your camera in different ways to generate the
statistics you required and statistic data can be exported in csv format file.
‐ Select Auto, camera can send yesterday report to Samba server or FTP server
automatically.
‐ Select and choose the Statistics Period that you want and also you can export or
reset the result.
‐ Statistics Chart Display: Here will show the result of Trip Zone.
A.6 e-Fence
The e-Fence is an electronic fence protection system which is able to detect and send
output alert if any object is entering or leaving the boundaries you set in the camera. This
function can be used in many applications, either as a standalone protection system or
other protection systems such as airports, power plants, radio towers or even military
camps.