AirLive BU-3026-IVS - Manual (Page 26)

6. Configuration
AirLive BU-3026/BU-3026-IVS User’s Manual 22
- Multicast Video Port: Assign a multicast port for video in the text box. The default
port is 5560.
- Multicast RTCP Video Port: Assign a multicast port for RTCP (real-time transport
control protocol) video in the text box. The default port is 5561.
- Multicast Audio Port: Assign a multicast port for audio in the text box. The default
port is 5562.
- Multicast RTCP Audio Port: Assign a multicast port for RTCP (real-time transport
control protocol) audio in the text box. The default port is 5563.
- Multicast TTL: Set the value from 1 to 255. TTL (time to live) is used to specify the
time to live in the IP header so that the system is able to decide whether or not the
packet has been in the network too long and should be discarded.
z Enable PPPoE: Select this option when you use a direct connection via the ADSL
modem. You need the User Name and Password of the PPPoE account to complete
the setting. The camera will get an IP address from the ISP as starting up.
Note: Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when you select PPPoE
as your connecting type, you have to set up the email or DDNS configuration in
advance.
z Enable DDNS: Select this option to enable DDNS service. With the Dynamic DNS
feature, you can assign a fixed host and domain name to a dynamic Internet IP
address. To set up the DDNS, select the Provider from the pull-down menu and then
enter the required information in the Host Name, User Name and Password text
boxes.
Note: You have to sign up for DDNS service with the service provider before
configuring this feature.