AirLive BU-720 - Manual (Page 43)

9. Event
AirLive BU-720 User’s Manual 38
- Action
There are multiple choices for action taking which is optional for a user to select all of
them or part of them: Send Image、Send Notification、PTZ Action or Night Mode.
z
Send Image: You may set up where the image sent to, options like event server
and SD card. You must configure it first. Please refer to Event Server (Chapter
9.1).
z
Send Notification: First go to HTTP server, and than configure the HTTP server
URL, port, User ID, Password, and Proxy server settings.
Note: The setting of URL should be same as CGI.
z
PTZ Action: First configure the PTZ to set up the preset positions and tour you
desired. You may select to return to the last position after the event being
triggered.
z
Night Mode: You may set up this action being activated continually while the
event triggered or continually every period (by second) interval.
Note: Only Motion Detection excludes Night Mode.
- Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend
or night mode. You must configure schedule before using it.
2. Scheduled Recording
- General
Name the recording file and make it on or off.
- Action
z
File Size: You can manually write in the file size as the suggested range.
z
Cyclic Size: You can manually write in the cyclic size as the suggested range.
- Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend
or night mode. You must configure schedule before using it.
9.3 Motion Detection
Add the motion detection zone and name it. You can adjust the zone of detection with the
mouse. Maximum 10 detection zone can be set. The bar on the top of motion detection
area is red when the alarm is triggered.