3 security, 4 network basic – AirLive BU-720 User Manual

Page 47

Advertising
background image

10. System




AirLive BU-720 User’s Manual 42

10.3 Security

1. Account

Please refer to Chapter 6.1.


2. IP Address Filter

Once it was enabled, the listed IP address are allowed or denied access to the product.
Add the IP Address that you’d like to allow or deny, and select allow or deny from the list
and save it.

3. HTTPS

HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically
identical to the http:// scheme normally used for accessing resources using HTTP. Use an
https: //URL/ with a different default TCP port (443) and an additional encryption /
authentication layer between the HTTP and TCP. You can use the IP camera through
HTTPS easily by using https:// instead of http://.

z

Create & Install: Create a self-signed certificate for HTTPS to recognize.

z

Installed Certificate: Display or remove the properties of the installed certificate.

z

HTTPS Connection Policy: Set HTTPS connection policy for different level of

users.

To use the HTTPS encryption, please set up “Create self-signed certificate” for the first
time you use the HTTPS function, and then set up the connection policy for different
users.

Note: When HTTPS with RTSP is enabled the “on” mode, the IP Camera only
protect the setting such as username and password, and do not protect video and
audio. When HTTPS with RTSP is enabled the “off” mode, the IP Camera will
protect all setting including video and audio.


10.4 Network Basic

Please refer to Chapter 6.2.



Advertising