AirLive DM-720 - Manual (Page 14)

2. Package Contents and Installation
AirLive DM-720User’Manual 9
2. Without Power over Ethernet (PoE) connection
Connect the power adaptor to the IP Camera. Using a standard RJ-45 network cable,
connect the IP Camera to a normal Hub / Switch / Router.
C. Adjust the view angle- 2 axis Mechanism Design
1. Turn the lens module right and left to your desired pan position.
2. Turn the lens module up and down to your desire tile position.
3. Turn the lens module to adjust the image orientation to satisfied angle.