AirLive DM-720 - Manual (Page 31)

6. Configuration-Basic Setup
AirLive DM-720 User’s Manual 26
- IP address: The IP address is obtained at the PPPoE connecting with network.
- user ID: Enter the user ID for authentication necessary of PPPoE connections. Type it
up to 64 characters.
- Password: Enter the password for authentication necessary of PPoE connections. Type
it up to 32 characters.
- Re-type password: Re-type the password to confirm.
- Obtain DNS server address automatically: Select this to obtain the address of DNS
server automatically.
- Use the following DNS server address: Select this when you set the fixed address as
the IP address of DNS server.
z
Primary DNS server: Enter the IP address of the primary DNS server.
z
Secondary DNS server: Enter the IP address of the secondary DNS server.
Note:
1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for
encapsulating Point-to-Point Protocol frames insider Ethernet frames. PPPoE
connection is used mainly with ADSL service where individual users connect to
the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL
(digital affiliate line such as ADSL, VDSL or SDSL)
2. Reboot the IP Camera after the network setting has been made.
3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the
PPPoE and reboot.