AirLive Ether-GSH2404W - Manual (Page 10)

2. Hardware Description
AirLive Ether-GSH2404W User’s Manual
7
2.4 Rear Panel
The 3-pronged power plug is located at the rear Panel of Ether-GSH2404W as shown
in figure. The switch will work with AC in the range of 100-240V AC, 50-60Hz.
The Rear Panel of Ether-GSH2404W
2.5 Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet nearby. The surface
where you put the switch should be clean, smooth, level and sturdy. Make sure there is
enough clearance around the switch to allow attachment of cables, power cord and
allow air circulation.
2.5.1 Attaching Rubber Pads
A. Make sure mounting surface on the bottom of the switch is grease and dust free.
B. Remove adhesive backing of Rubber Pads.
C. Apply the Rubber Pads to each corner on the bottom of the switch and these
footpads can prevent the switch from shock/vibration.
2.6 Rack-mounted Installation
Ether-GSH2404W come with a rack-mounted kid and can be mounted in an EIA
standard size/19-inch Rack. The switch can be placed in a wiring closet with other
equipment.
Perform the following steps to rack mount the switch:
1. Position one bracket to align with the holes on one side of the switch and secure it