AirLive Ether-GSH2404W - Manual (Page 27)

4. Web-Based Management
AirLive Ether-GSH2404W User’s Manual
24
4.8.2 RSTP Port Configuration
„ Protocol Enabled: To Enable or disable the port protocol
„ Edge: The port directly connected to end stations cannot create bridging loop in
the network. To configure the port as an edge port, mark the port
„ Path Cost: The cost of the path to the other bridge from this transmitting bridge at
the specified port. Enter a number 1 through 200000000
„ Click Apply to apply the configuration
„ Or, click Refresh to reset the configuration before applying
4.9 802.1X Configuration
802.1x is an IEEE authentication feature which allows a client connecting to a wireless
access point or wired switch, however, prevents the client from gaining access to the
Internet until it provides credentials, like a user name and password that are verified by
a separated server.
„ Mode: To disable or enable 802.1x protocol
„ RADIUS IP: Set the Radius Server IP address
„ RADIUS UDP Port: Set the UDP destination port for authentication requests to
the specified Radius Server
„ RADIUS Secret: Set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used on
the Radius Server
„ Admin State: Select the state of port
¾ Force Authorized: The specified port is required to be held in the
unauthorized state
¾ Force Unauthorized: The specified port is required to be held in the
authorized state
¾ Auto: The specified port is set to the authorized or unauthorized state in
accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server