AirLive HP-1000E v2 - Manual (Page 9)

MAC Address The MAC address of each Powerline device is shown
here.
Data Rate (Mbps) The transmission speed of the Powerline device is
displayed here.
Scan Powerline
Network Click the Scan Powerline Network button to perform a
search for all Powerline devices configured with the
same Network Password.
Security
The Security screen allows you to set the Network Password of the Powerline device being used by
your PC. All of the Powerline devices on your Powerline network must use the same Network
Password.
Note: Remember this password. You will need to set this password on
each powerline device on your powerline network.
Network Password By default the Network password is “HomePlug” and the
password must have between 4 and 24 characters. The Network
Password is case-sensitive, so note whether you use lowercase
or uppercase letters. It can include any letters of the alphabet,
numbers, or punctuation marks
Set Local Enter the Network Password in the Network Password field. Then
click the Set Local button.
Restore Default Click the Restore Default button to set the Network Password
back to its factory default setting, HomePlug. Then click the Set
button.
- 7 - HP1000E v2 User’s Manual