AirLive IGR-2500 - Manual (Page 25)

3.6 Routing Table
3.6.1 Configure
This function allows manually defined by users as the only path to the destination. Users can configure the
static routing path to IGR-2500.
„ Static Routing
There have one pc with two interfaces in this area, one interface is connected to IGR-2500 (domain A), and
the other connected to another Server (domain B). Users need to set the static routing path in IGR-2500 in
order to recognize another domain in this area. These settings enable the packets from domain A to the
destination in domain B via the gateway configured in IGR-2500. (Figure 3-14, 3-15)
Figure 3-14 Static Routing
22