AirLive IGR-2500 - Manual (Page 50)

„ Dynamic IP DMZ:
When a WAN port IP is assigned by ISP and obtained by PPPoE or Dynamic IP, you can use this section to
specify the DMZ host disregarding the exact WAN IP address. Tick the WAN port option and fill in the IP
address of the DMZ host inside the network, the IGR-2500 will map the corresponding WAN IP to the internal
DMZ host automatically. When a remote computer wants to access the internal LAN through this WAN, if the
accessed port number is not specified by Virtual Server Host, it will be mapped into this internal DMZ host.
For example, if your WAN1 uses PPPoE connection to obtain a public IP address, the IGR-2500 will let data
packet with destination address point to WAN1, and pass through into DMZ Host when the port number of the
packet does not exist in Virtual Server Host table.
(Figure 3-48)
Figure 3-48 Dynamic IP DMZ
„ Multi-DMZ:
If you use fixed WAN IP address assigned by your ISP, you can use this section to specifically assign the
WAN IP address to corresponding DMZ host. If you own several legal WAN IPs, you can assign which WAN
IP correspond to which IP on your LAN. This assignment will let most protocol to access the assigned IP on
the LAN. The following figure is an example: (Figure 3-49)
47