AirLive N.TOP - Manual (Page 43)

5. System Configurations
AirLive N.TOP User’s Manual 38
5.2 LAN Interface Setup
System >> LAN Interface Setup
This menu is where you can configuration all the aspect about LAN interface including IP
address, DHCP server settings etc.
5.2.1 DHCP Settings
DHCP Service: You can enable or disable DHCP server here.
Disable(default): Disable DHCP server
Enable: The N.TOP will act as DHCP server to provide IP addresses to
the clients on the LAN/Wireless interface. By default, the DHCP server
is on.
DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address.. Click on “Show Client” to see the current DHCP client table.
DHCP Release Time: You can define how long the N.TOP will reserve IP
address for a particular PC or Device here.
Device IP
Settings
DHCP
Settings