AirLive N.TOP - Manual (Page 44)

5. System Configurations
39 AirLive N.TOP User’s Manual
5.2.2 Set Static DHCP
If you want to lock IP address to a MAC address, you should add DHCP clients to the
“Static DHCP List”. Up to 40 entries can be entered. Below is the procedure for adding
an entry:
1. Enter the MAC address of the device
2. Enter the IP address of the device
3. Click on the “Apply Changes” button
5.2.3 Domain Name
You can enter the network area name here.
5.2.4 802.11d Spanning Tree
Select Disabled or Enabled form the pull-down list.
5.2.5 Clone MAC Address
You can change the MAC address of your LAN port to other value here.
5.2.6 Enable AirLive IP Finder Management
By enabling the function, IP Finder could discover the N.TOP in the LAN.