AirLive N450R User Manual
Page 32
AirLive N450R User’s Manual
27
3. Connection Control
There are 3 options to start connection:
n
Auto Reconnect (Always-on)
The device will always try to link to Internet.
n
Connect-on-demand
The device won’t try to connect to Internet until LAN PCs or devices try to go to
Internet. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
n
Manually
The device won’t try to connect to Internet until users press “connect” button at
Status page. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
4. Allowed Connection Time
You can limit WAN connection in a period of time if required.
5. Keep Alive
There are three options for keep alive feature as below.
n
Disable
Disable keep alive feature.
n
LCP Echo Request
The device will constantly send LCP packets for keeping alive. Enter the time
interval and the maximum failure count.
n
Ping Remote Host
Enter the Remote host IP address and the time interval to send the ping packets
for keeping alive.
6. NAT Disable
You can disable NAT feature if required.
7. IGMP Proxy
Enable this feature allows multicast stream (e.g. IPTV stream) to pass-through this
device.
NOTE: The items with * above are only available when choosing Manual for Dial-up
Profile.