AirLive P-203N - Manual (Page 41)

14. Select Queues Serviced by Printer, then select Printer 0 (or Printer 1,
Printer 2) and press Enter.
15. Press Insert and add your newly created print queue to the list of
queues serviced by the printer. Enter a priority number for the queue service,
or press Enter to accept the default.
16. Repeatedly press Escape to exit the PCONSOLE program.
17. Reset the print server to have the changes take effect.
NOTE: If the print server you have is with multiple printer connectors,
you may create multiple print queues and printer objects.
Your print server should now be ready to use. You should be able to
redirect printing to your print server using a CAPTURE command such as the
one shown in the previous section.
36 AirLive P-203N User’s Manual