AirLive P-203N - Manual (Page 97)

SNMPC The administrator contact
information of this print
server for SNMP set SNMPC sbdjohn@hotm
ail.com
SNMPL The installed location of
this print server for
SNMP set SNMPL Room301
port1 The port name of this
print server set port1 lpt1
DHCPS Enable or disable the
DHCP server.
The value should be
“disabled” or “enabled”. set DHCPS disable
DHCP Enable or disable to get
dynamic IP by DHCP.
The value should be
“disabled” or “enabled”. set DHCP disable
appletalk Enable or disable
AppleTalk printing
The value should be
“disabled” or “enabled”. set appletalk disable
SMBD Enable or disable SMB
printing
The value should be
“disabled” or “enabled”. set SMBD enable
SNMP Enable or disable SNMP
management protocol
The value should be
“disabled” or “enabled”. set SNMP enable
IPX Enable or disable NetWare
Bindery printing
The value should be
“disabled” or “enabled”. set IPX enable
LPD Enable or disable LPR
printing
The value should be
“disabled” or “enabled”. set LPD enable
IPP Enable or disable IPP
printing
The value should be
“disabled” or “enabled”. set IPP enable
RAW Enable or disable RAW
printing
The value should be
“disabled” or “enabled”. set RAW enable
92 AirLive P-203N User’s Manual