AirLive POE-FSH2422G-250 - Manual (Page 37)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual
32
4.21 Per Port Counter
This page provides port counter of each port. There are 4 categories: Receive Packet &
Transmit Packet/ Transmit & Collision / Receive Packet & Drop /Receive & CRC error.
Once you change the counter category, the counter will be cleared automatically.
„ Transmit packet& collision: This category shows the packets outgoing from the switch
and the count of collision.
„ Receive packet& Transmit packet: This category shows both the received packet
count(excluding the incorrect packet) and the transmitted packet count.
t: This category shows the number of received valid
pped packet.
l ports.
Clear: Press “clear” will clear all counters.
„ Receive packet & Drop packe
packet and the number of dro
„ Receive packet & CRC packet: This category shows the received correct packet and
received CRC error.
„ Refresh: Press “Refresh” button will aggregate the number of the counter for al
4.2
for
inc g, and redundancy of links in a switched
of its component physical links. Traffic in a trunk is distributed across an individual link
gro to the remaining ports. Load balancing is
maintained whenever a link in a trunk is lost or returned to service. This switch may use
Port ID, Source MAC Address, Destination MAC Address, or a combination of Source MAC
ion MAC Address to be the selection for Trunk Hash Algorithm. Traffic
k should be considered carefully before applying it. When a proper
2 Trunking
Port trunk allows multiple links to be bundled together and act as a single physical link
reased throughput. It provides load balancin
inter-network. Actually, the link does not have an inherent total bandwidth equal to the sum
within the trunk in a deterministic method that called a hash algorithm. The hash algorithm
automatically applies load balancing to the ports in the trunk. A port failure within the trunk
up causes the network traffic to be directed
Address and Destinat
pattern on the networ
hash algorithm is used, traffic is kind of randomly decided to be transmitted across either
link within the trunk and load balancing will be seen.
This managed switch supports two trunk group, each trunk consists of 2~4 ports. Trunk
hash algorithm can be selected according to 4 different methods.