AirLive POE-FSH2422G-250 - Manual (Page 40)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual 35
4.26 TCP/UDP Port Based (QoS Setting)
The user can select the protocol that will be forwarded as the specified mode. There are 3
user-defined UDP/TCP port groups and many well-known TCP/UDP ports. The
user-defined port number may be a range or a specific number, depending on the mask.
The operating theory for all 4 CoS types can be illustrated by the following figure and table.
TCP/UDP CoS is a global setting for all ports and has no connection with the physical port.
Other CoS types have a connection with the physical port.
4.27 Security
There are many management functions can be set or performed if you click the
the following sessions, we will talk in detail about the management functions under the
Security on Home Page, including:
„ MAC Address Binding
„ TCP/UDP Filter
In
Security menu.
4.28 MAC Address Binding (QoS Setting)
a method for the administrator to specify the relationship between
the MAC address. Only the packet with specified source MAC
ork
orized user from accessing the switch. Each port can
orrespond to up to 3 MAC addresses.
function, you should enter the correct MAC address, select the
port number, and set the port binding to “enable” and then press “update”.
This function provides
the physical port and
address can be forwarded. By specifying the MAC address to each port, the netw
administrator can prevent the unauth
c
To activate the port binding